Cruxi research & evidence

CBAM Verification evidence guides — page 2

Compare documented facts, dated analyses and evidence that can change your project scope. Confirm applicability with a specialist.

• CBAM 31052010 — compare reference values for Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg)CBAM reference comparison
• CBAM 31053000 — compare reference values for Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg)CBAM reference comparison
• CBAM 31054000 — compare reference values for Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg)CBAM reference comparison
• CBAM 31059020 — compare reference values for Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg)CBAM reference comparison
• CBAM 31059080 — compare reference values for Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg)CBAM reference comparison
• CBAM 72026000 — compare reference values for Ferro-nickelCBAM reference comparison
• CBAM 72061000 — compare reference values for Ingots, of iron and non-alloy steel (excl. remelted scrap ingots, continuous cast products, iron of heading 7203)CBAM reference comparison
• CBAM 72069000 — compare reference values for Iron and non-alloy steel, in puddled bars or other primary forms (excl. ingots, remelted scrap ingots, continuous cast products, iron of heading 7203)CBAM reference comparison
• CBAM 72071111 — compare reference values for Semi-finished products, of non-alloy free-cutting steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous castingCBAM reference comparison
• CBAM 72071190 — compare reference values for Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular cross-section, the width < twice the thickness, forgedCBAM reference comparison
• CBAM 72111300 — compare reference values for Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as "wide flats"CBAM reference comparison
• CBAM 72112900 — compare reference values for Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight >= 0,25% of carbonCBAM reference comparison
• CBAM 72181000 — compare reference values for Steel, stainless, in ingots and other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting)CBAM reference comparison
• CBAM 72189911 — compare reference values for Semi-finished products of stainless steel, of square cross-section, rolled or obtained by continuous castingCBAM reference comparison
• CBAM 72193100 — compare reference values for Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 4,75 mmCBAM reference comparison
• CBAM 72249002 — compare reference values for Semi-finished products of tool steelCBAM reference comparison
• CBAM 72249018 — compare reference values for Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, forged (excl. of tool steel)CBAM reference comparison
• CBAM 72251100 — compare reference values for Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, grain-orientedCBAM reference comparison
• CBAM 72251910 — compare reference values for Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, hot-rolledCBAM reference comparison
• CBAM 72251990 — compare reference values for Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, cold-rolled "cold-reduced", non-grain-orientedCBAM reference comparison
• CBAM 72259100 — compare reference values for Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and electrolytically plated or coated with zinc (excl. products of silicon-electrical steel)CBAM reference comparison
• CBAM 72261910 — compare reference values for Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, not further worked than hot-rolledCBAM reference comparison
• CBAM 72261980 — compare reference values for Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, cold-rolled "cold-reduced", whether or not further worked, or hot-rolled and further worked, non-grain-orientedCBAM reference comparison
• CBAM 72269200 — compare reference values for Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of high-speed steel or silicon-electrical steel)CBAM reference comparison
• CBAM 72281020 — compare reference values for Bars and rods of high-speed steel, not further worked than hot-rolled, hot-drawn or extruded, and hot-rolled, hot-drawn or extruded, not further worked than clad (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils)CBAM reference comparison

Page 2 of 4