Service decision and evidence guide

Simultaneous transmitters: prepare a combined RF-exposure evidence scope

The acquired mobile and portable exposure provisions expressly address multiple RF sources operating in the same averaging period. Inventory simultaneous configurations instead of assuming independent component reports prove the combined device; the referenced exemption-ratio provisions need separate current review.

Evidence retrieved 2026-10-06. Source versions and topic-specific limits are listed below.

Sourced criteria · US

What changes the service scope?

Decision or taskWhat the source describesWhat to prepare
title 47 / section § 2.1091 / XML P[4](2) For multiple mobile or portable RF sources within a device operating in the same time averaging period, routine environmental evaluation is required if the formula in § 1.1307(b)(3)(ii)(B) of this chapter is applied to determine the exemption ratio and the result is greater than 1. [1]Compare this exact dated paragraph, its stated conditions and the linked provisions with the supplied configuration evidence.
title 47 / section § 2.1093 / XML P[4](2) For multiple mobile or portable RF sources within a device operating in the same time averaging period, evaluation is required if the formula in § 1.1307(b)(3)(ii)(B) of this chapter is applied to determine the exemption ratio and the result is greater than 1. [2]Compare this exact dated paragraph, its stated conditions and the linked provisions with the supplied configuration evidence.
title 47 / section § 2.1091 / XML P[5](3) Unless otherwise specified in this chapter, any other single mobile or multiple mobile and portable RF source(s) associated with a device is exempt from routine environmental evaluation for RF exposure prior to equipment authorization or use, except as specified in § 1.1307(c) and (d) of this chapter. [3]Compare this exact dated paragraph, its stated conditions and the linked provisions with the supplied configuration evidence.
title 47 / section § 2.1093 / XML P[5](3) Unless otherwise specified in this chapter, any other single portable or multiple mobile and portable RF source(s) associated with a device is exempt from routine environmental evaluation for RF exposure prior to equipment authorization or use, except as specified in § 1.1307(c) and (d) of this chapter. [4]Compare this exact dated paragraph, its stated conditions and the linked provisions with the supplied configuration evidence.

This is a focused preparation guide, not the complete rule set or a product-specific legal determination. Current related rules, amendments/effective dates, grant conditions and deciding buyer facts remain unresolved. No scope, exemption, certification, emission limit or test-panel result is automatically assigned.

Prepare the RF configuration evidence

Use this checklist to gather your business or product details before speaking with a specialist. The items below explain what to record and suggest useful supporting documents. You can add your own answers in the editable project brief.

  1. List simultaneous operating states

    Record radios, frequencies, antennas, separations and which combinations can actually transmit together.

    Useful evidence: Radio architecture and simultaneous-mode/control matrix.

  2. Preserve each source’s inputs

    Provide time-averaged power and use/separation evidence for each relevant configuration; retain unresolved values.

    Useful evidence: Per-source RF data, averaging/control evidence and body-separation drawings.

  3. Commission the combined assessment

    Ask the specialist to apply the current referenced exemption/evaluation provisions and identify unsupported combinations.

    Useful evidence: Combined applicability/method rationale, configuration evaluation and restrictions.

Work packages and dependencies

Questions for providers

Sources and data dates

Read the official document in context. The audit details identify the precise locators and preserved versions used for this page.

US Government Publishing Office — published reference ↗

Fri, 02 Oct 2026 22:25:14 GMT · retrieved 2026-10-06

Audit details: precise locators and snapshot identifiers

Source key D04 · snapshot a1c7cfb0391c4e4455ba68a7af0d224f94eb03de5528f1ff12ea3562d7ff1a55

  • [1] title 47 / section § 2.1091 / XML P[4] · record 63935a58934c6eb933eb4dee5453100e268066c1d6497653cf5e2005c2202ccd
  • [2] title 47 / section § 2.1093 / XML P[4] · record 4d0e52ddbb758a760e12e172f01c9d04cdfa2a41fe3357610bd8b0dcf143391e
  • [3] title 47 / section § 2.1091 / XML P[5] · record b8d1bec31c6eef65d4dc3d7093e66c6c776bcefe24faae3059e21646966cd2cb
  • [4] title 47 / section § 2.1093 / XML P[5] · record fad522b9d70b2e822c02c89f52fba2e26019b5435b5260c42ea7cc1d272679ef

Prepare an editable project brief

Confirm the facts, scope and contact preference before sharing your project. Preparing this page sends no provider outreach.

Choose work packages to discuss

Compare Wireless / RF Testing (FCC / RED / ISED)