Reported risk evidence comparison

Lighting equipment: insulation — reported risk evidence

The acquired cohort contains 172 official alert references published from 2005-06-03 to 2026-10-02. This page compares 8 selected, distinct product descriptions, including bathroom light, lamp, ceiling lamp. The other 164 records still contribute to the cohort counts but are not displayed: descriptions may repeat, lack the display inputs, or fall outside the eight-description display limit. The recorded risks raise separate evidence questions about insulation. Compare the product features and dated findings below before scoping an investigation. These historical observations do not determine your product’s compliance or a market failure rate.

Evidence retrieved 2026-10-07. Source versions and topic-specific limits are listed below.

Dated official observations

Compare the product features and reported failure mechanism

The source wording below describes the reported case at that time. Read each complete report before using it in an investigation.

Bathroom light · SR/02741/26

Report published 2026-10-02 · notifying country United Kingdom in respect of Northern Ireland · reported origin People's Republic of China

Reported product description
LED light bathroom mirror for wall mounting. [1]
Reported risk explanation
The product has insufficient creepage and clearance distances between the circuits, and the insulation is insufficient. This could lead to the product overheating, leading to a fire. The product does not comply with the Low Voltage Directive. [1]
Reported measures, verbatim
Type of economic operator to whom the measure(s) were ordered: ImporterCategory of measure(s): Import rejected at borderDate of entry into force: 01/07/2026 [1]

Read the official alert ↗

Lamp · SR/02084/26

Report published 2026-07-24 · notifying country Poland · reported origin Poland

Reported product description
Class II lighting fixture with a glass shade and metal mesh, max. 18W, 230V/50Hz, IP44. [2]
Reported risk explanation
The insulation of the product is inadequate. The user could therefore touch accessible live parts during light source replacement and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60598-1. [2]
Reported measures, verbatim
Type of economic operator taking notified measure(s): ManufacturerCategory of measure(s): Withdrawal of the product from the marketDate of entry into force: 17/06/2026Type of economic operator taking notified measure(s): ManufacturerCategory of measure(s): Warning consumers of the risksDate of entry into force: 17/06/2026 [2]

Read the official alert ↗

Ceiling lamp · SR/01558/26

Report published 2026-06-05 · notifying country Poland · reported origin People's Republic of China

Reported product description
Light fixture with metal casing, 220 -240V, max 40W, 4 x GU10. [3]
Reported risk explanation
The creepage and clearance distances of internal wires and the insulation of internal wires is inadequate. A live wire may contact metal parts of the lamp. Moreover, the lamp sockets are not reliably connected and secured and the cross-sectional area of internal wires is too small. Live parts of the lamp may become accessible. Consequently the user may touch live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60598-1 and EN 60598-2. [3]
Reported measures, verbatim
Type of economic operator taking notified measure(s): ManufacturerCategory of measure(s): Warning consumers of the risksDate of entry into force: 09/04/2026Type of economic operator taking notified measure(s): ManufacturerCategory of measure(s): Withdrawal of the product from the marketDate of entry into force: 09/04/2026 [3]

Read the official alert ↗

Ceiling lamp · SR/00894/26

Report published 2026-03-27 · notifying country United Kingdom in respect of Northern Ireland · reported origin People's Republic of China

Reported product description
Black and white LED ceiling mounted lamp. Product sold online, in particular via Amazon (ASIN: B0CNZ7V1CY). [4]
Reported risk explanation
The product has insufficient insulation, creepage and clearance distances. In the event of an electrical fault, the user could receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive. [4]
Reported measures, verbatim
Type of economic operator to whom the measure(s) were ordered: RetailerCategory of measure(s): Removal of this product listing by the online marketplaceDate of entry into force: 12/01/2026Type of economic operator to whom the measure(s) were ordered: ImporterCategory of measure(s): Import rejected at borderDate of entry into force: 17/12/2025 [4]

Read the official alert ↗

Portable lamp · SR/00141/26

Report published 2026-01-23 · notifying country Sweden · reported origin Poland

Reported product description
Portable light with clamp holder. Product sold online, in particular via CDON. [5]
Reported risk explanation
There is no safe isolation barrier between the primary and secondary circuits in the LED light source. Moreover, the metal base of the LED light source is touchable when the light source is connected to the lamp holder. The user may touch live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard 62560 and EN 60598-1. [5]
Reported measures, verbatim
Type of economic operator taking notified measure(s): ManufacturerCategory of measure(s): Recall of the product from end usersDate of entry into force: 17/12/2025 [5]

Read the official alert ↗

Mirror · A12/02780/24

Report published 2024-10-11 · notifying country Denmark · reported origin People's Republic of China

Reported product description
Mirror with built in LED-lights. Product sold online. [6]
Reported risk explanation
The insulation of the switch is inadequate. The user could touch the accessible live parts during the installation and maintenance of the product and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive, nor with the European standards EN 60598-1 and EN 60598-2-1. [6]
Reported measures, verbatim
Type of economic operator taking notified measure(s): ManufacturerCategory of measure(s): Withdrawal of the product from the marketDate of entry into force: Unknown [6]

Read the official alert ↗

LED floodlight · A11/00093/24

Report published 2024-08-09 · notifying country Slovakia · reported origin People's Republic of China

Reported product description
Black LED floodlight. Product sold online. [7]
Reported risk explanation
The electrical insulation is inadequate, the electrical strength is insufficient and a user could receive an electric shock from accessible live parts. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60598-1 and EN 60598-2. [7]
Reported measures, verbatim
Type of economic operator taking notified measure(s): ImporterCategory of measure(s): Stop of salesDate of entry into force: 18/06/2024Type of economic operator taking notified measure(s): ImporterCategory of measure(s): Warning consumers of the risksDate of entry into force: 18/06/2024Type of economic operator taking notified measure(s): ImporterCategory of measure(s): Withdrawal of the product from the marketDate of entry into force: 18/06/2024 [7]

Read the official alert ↗

Ceiling LED lamp · A12/01599/23

Report published 2023-07-14 · notifying country Denmark · reported origin People's Republic of China

Reported product description
A ceiling luminaire with LED battery. Size 80 mm x 610mm x 25 mm. The product is sold online. [8]
Reported risk explanation
The clearance and creepage distances between the primary and accessible secondary circuits are not sufficient. A user could receive an electric shock from accessible live parts. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60598. [8]
Reported measures, verbatim
Type of economic operator to whom the measure(s) were ordered: ManufacturerCategory of measure(s): Recall of the product from end usersDate of entry into force: 02/05/2023 [8]

Read the official alert ↗

What this acquired cohort contains

172 distinct official alert references, published between 2005-06-03 and 2026-10-02. Counts describe the acquired reports, with no market denominator.

Report yearRecorded alerts
20052
20062
20073
20092
20104
20115
201220
201321
201418
20156
201613
201722
201814
20199
20206
20216
20224
20234
20243
20251
20267

Recorded risk labels within this evidence task

Label combinations are source facts within one comparison; they do not create separate guides with identical preparation tasks.

Source selection, exclusions and calculation method

Filter the acquired, completely parsed English weekly XML releases. Deduplicate official alert references. Group by product category and the complete set of conditional evidence-question topics supported by actual risk text. Risk-label combinations remain recorded cohort facets and do not create buyer intents. Brand, product name, model, origin, notifying country, measurement-only changes and different wording of the same questions do not create intents. Unrecognized mechanisms stay internal for enrichment. Count report years and notifying countries deterministically. Display at most eight newest descriptions with at least 40 characters after whitespace normalization, nonempty reported measures and distinct casefolded descriptions; break date ties by official identifier. All cohort records count even if their description is shorter or not displayed. This is not a representative sample. Counts concern this acquired corpus only.

One acquired version per official public alert reference. Display at most eight newest distinct product descriptions whose normalized whitespace-collapsed text contains at least 40 characters and has nonempty reported measures; ties sort by official identifier. The complete cohort includes shorter descriptions. This is an explicit display selection, not a representative sample.

8 distinct descriptions displayed; 164 cohort records not displayed. Missing fields: {'measures': 29, 'description': 1}.

These are selected, dated enforcement observations in the acquired weekly reports, not a random market sample, market-wide failure rate, proof of current product status, or a determination about your product. Notification country is not a complete sales-market or jurisdiction-coverage field. A quoted legal/standard reference is the report’s statement, not independently verified current law or a mandatory test panel.

Calculation safety-gate-evidence-comparison-10; units recorded alerts; no incidence denominator.

Turn the reported failure mechanism into a scoped investigation

Use this checklist to gather your business or product details before speaking with a specialist. The items below explain what to record and suggest useful supporting documents. You can add your own answers in the editable project brief.

  1. Power-supply insulation boundaries — what evidence do we have?

    If your product uses a mains supply or adapter, identify the actual power-supply architecture, insulation boundaries and accessible parts. Ask a qualified specialist which design evidence and investigation would address the reported shock mechanism for this configuration. No medical-device standard or pass/fail limit is selected from this alert.

    Useful evidence: Schematics, adapter/component specifications, ratings, insulation/protection design and configuration-specific existing test evidence.

    Reported context: [1], [2], [3], [4], [5], [6], [7], [8]

  2. Can we trace the affected component, formula or design revision across our supplied products?

    Compare the reported descriptions with your own identifiers and change records. Treat missing or “Unknown” source fields as unresolved; they do not establish that no action was needed.

    Useful evidence: Product identifiers, revision history, supplier/batch traceability and market/operator records.

  3. Who would own an evidence review and any resulting corrective-action decision?

    Read the reported measures as historical observations. Establish your own operator roles, sector-specific rules, decision owner and communication responsibilities before adopting another case’s response.

    Useful evidence: Supply-chain responsibility map, applicable-law review, investigation scope and documented decision/communication workflow.

Work packages and dependencies

Questions for providers

Sources and data dates

Read the official document in context. The audit details identify the precise locators and preserved versions used for this page.

Prepare an editable project brief

Confirm the facts, scope and contact preference before sharing your project. Preparing this page sends no provider outreach.

Choose work packages to discuss

Compare Find GPSR Responsible Person (EU/NI) | Compare & Get Quotes