Compliance research

ISO 23500-4 Second edition 2024-04 — FDA recognition transition and report handoff

FDA’s acquired supplementary sheets explicitly connect 9-136 to 9-155 and state declaration-acceptance date(s) for the replaced recognition: recognition 9-136: 2028-07-02. Compare the exact edition and recognition limitations with your reports before agreeing the submission evidence or further work.

Evidence retrieved 2026-10-07. Source versions and topic-specific limits are listed below.

Exact FDA recognition records

Compare the edition and the recognized portion

Read these columns together. A complete recognition is not a device-specific testing instruction. The limitations are the FDA’s public metadata; the licensed standard itself is not reproduced.

Recognition / editionPublic recognition limitationsDeclaration transition context
FDA 9-136
ISO 23500-4 First edition 2019-02; ANSI AAMI ISO 23500-4:2019

Preparation and quality management of fluids for haemodialysis and related therapies - Part 4: Concentrates for haemodialysis and related therapies

Partial

Partial recognition. The following part(s) of the standard is (are) not recognized: Section 4.1.3.1 Bacteriology of acid concentrates Section 4.3.7 Piping systems - Last sentence "The disinfection of piping systems for acid concentrate is normally not necessary because acid concentrates are typically bacteriostatic."

[3] [4] [6]
Exported transition expiration: 07/02/2028
FDA 9-155
ISO 23500-4 Second edition 2024-04

Preparation and quality management of fluids for haemodialysis and related therapies - Part 4: Concentrates for haemodialysis and related therapies

Partial

Partial recognition. The following part(s) of the standard is (are) not recognized: Section 4.1.3.1 Bacteriology of acid concentrates Section 4.3.7 Piping systems - Last sentence "The disinfection of piping systems for acid concentrate is normally not necessary because acid concentrates are typically bacteriostatic."

[5] [7]
No expiration date is stated in this acquired export row. That is not a guarantee of indefinite recognition.

What FDA’s transition statement says

Recognition 9-136 → 9-155

FDA recognition of ISO 23500-4 First edition 2019-02 [Rec# 9-136] will be superseded by recognition of ISO 23500-4 Second edition 2024-04 [Rec# 9-155]. FDA will accept declarations of conformity, in support of premarket submissions, to [Rec# 9-136] until July 2, 2028. After this transition period, declarations of conformity to [Rec# 9-136] will not be accepted.

Exact statements were reconciled on both acquired sheets and against the old recognition’s exported date. [1] [2]

FDA public recognition metadata describes use of declarations of conformity in support of premarket submissions. A recognition transition is not a universal retesting deadline, a product ban, or proof that this standard applies to your device. The technical differences between licensed editions, adequacy of existing reports, buyer-specific route and final test scope remain incomplete. The comparison below does not reproduce the standard or establish FDA approval.

Method: Exact directed old-to-new statements are reconciled across both acquired sheets and the old export date. No name-similarity mapping or technical-clause inference.

Build your edition-to-report handoff matrix

Use this checklist to gather your business or product details before speaking with a specialist. The items below explain what to record and suggest useful supporting documents. You can add your own answers in the editable project brief.

  1. Which edition is actually in your evidence?

    Reconcile each report and declaration against ISO 23500-4 Second edition 2024-04 and the replaced designation(s) ISO 23500-4 First edition 2019-02; ANSI AAMI ISO 23500-4:2019. Record amendments and the exact report/device revision. A similar standard number is not an edition match.

    Useful evidence: Report cover, method/edition references, amendments, declarations and device/configuration revision.

  2. Does the declaration cover the recognized portion?

    Use the complete FDA public limitation text in the comparison table. Map each listed exclusion, where present, to the relevant report sections and obtain a reasoned evidence assessment. Complete recognition still does not determine device applicability.

    Useful evidence: Recognition-to-report coverage matrix, excluded-clause assessment and the licensed edition used by your specialist.

  3. How does the recorded transition affect your submission plan?

    Record planned declaration/submission dates against the FDA sheet’s acceptance date(s): recognition 9-136: 2028-07-02. This concerns declarations supporting premarket submissions to the replaced recognition; do not treat it as a blanket deadline to retest or stop selling.

    Useful evidence: Submission plan, intended declaration references, dated recognition-sheet check and rationale for the chosen evidence route.

  4. What changed beyond the designation?

    Ask the specialist to assess the actual licensed edition/amendment differences for your design, materials, software and use environment. Separate a documented evidence gap from a changed title. This metadata comparison does not establish which tests changed or must be repeated.

    Useful evidence: Edition gap assessment tied to the device and existing evidence, with a bridging rationale and unresolved inputs.

  5. What should the quote include?

    Request a report/recognition reconciliation and a justified gap assessment first. Separate any proposed additional evaluation or testing, samples, methods, deliverables and exclusions; agree them only after applicability and existing evidence are assessed.

    Useful evidence: A scoped evidence-assessment quote; separately identified conditional work and report ownership.

Work packages and dependencies

Questions for providers

Sources and data dates

Read the official document in context. The audit details identify the precise locators and preserved versions used for this page.

FDA — recognised standards metadata ↗

Version not stated by the source · retrieved 2026-10-07

Audit details: precise locators and snapshot identifiers

Source key D02 · snapshot 47d01d423559639bb9273182f63512aed86cdf681ca9d88b5af4359043faf885

  • [1] HTML tr 25 / Transition Period / nested table · record 089214fb016f4d0e8c874943005b38a65c403d834a9f56f55cdade87588ed8ff
  • [6] HTML tr 20 / Extent of Recognition / nested table · record 89cd927a32bd527b2baa7790206f92b17a36ae45d4bcb109e188347155fc0f67

FDA — recognised standards metadata ↗

Version not stated by the source · retrieved 2026-10-07

Audit details: precise locators and snapshot identifiers

Source key D02 · snapshot 1b65e597b69b7acb468511608f173624d270f9cba0407f6d2cc70b65172d3618

  • [2] HTML tr 23 / Transition Period / nested table · record 0e06be61d9c125bdba3373ff364eb9112f80a959e4fcc25735e5e091131560ee
  • [7] HTML tr 18 / Extent of Recognition / nested table · record eeb9bbb97bdd7d53ebcf2619651f73e15a6b7b665599f0bec82c04483e45eed1

FDA — recognition metadata exported through the official search form ↗

Version not stated by the source · retrieved 2026-10-07

Audit details: precise locators and snapshot identifiers

Source key D02 · snapshot 94ccf56dc846c7f6d78d6ad77dc6e87d1803ac3612af01d6894949e34c4a78d8

  • [3] CSV row 816 · record 251ab2c7b512ee7793bfc00ab8791fa97cdb3c68b93ef6812699078c55d8ab14
  • [4] CSV row 817 · record 4a4a76f97f481ced3183400470a728fe27b1c903a58c35fcf3f4890e5388a017
  • [5] CSV row 62 · record 4d635838f13b93d0edf5c9921374c9669b756e3bf298b4004634b3997741b6e0

Prepare an editable project brief

Confirm the facts, scope and contact preference before sharing your project. Preparing this page sends no provider outreach.

Choose work packages to discuss

Compare FDA 510(k) Submission Services