This comparison covers 4 official alert references, including hand mixer, hand mixer with bowl, published from 2006-04-28 to 2009-08-28. The recorded risks raise separate evidence questions about plug interfaces, accessible edges. Compare the product features and dated findings below before scoping an investigation. These historical observations do not determine your product’s compliance or a market failure rate.
Evidence retrieved 2026-10-07. Source versions and topic-specific limits are listed below.
Dated official observations
Compare the product features and reported failure mechanism
The source wording below describes the reported case at that time. Read each complete report before using it in an investigation.
Hand mixer · 1145/09
Report published 2009-08-28 · notifying country Hungary · reported origin Unknown
Reported product description
The product has white (on the upper part) and grey (on the bottom part) plastic cover. Main components: mains plug (JMW, 2.5A, 250V, + marks of approval); mains cable (ÖVE KEMA-KEUR CEBEC SHUN DE SHUN LANG HO3VVH2-F 2x0.75mm2 VDE); speed control; motor. Technical parameters: 230 V; 50 Hz; 250 W; Class II. [1]
Reported risk explanation
The product poses a risk of electric shock because:- the internal wires are not fixed and thus can get damaged when contacting sharp edges, - the mains plug is of a non-standardized type.In addition, the beaters are interchangeable and food can get into the appliance.The product does not comply with Low Voltage Directive and the relevant European standard EN 60335. [1]
Reported measures, verbatim
Type of economic operator to whom the measure(s) were ordered: OtherCategory of measure(s): Withdrawal from the market ordered by the authorities.Date of entry into force: Unknown [1]
Report published 2009-01-23 · notifying country Hungary · reported origin Unknown
Reported product description
The product is white and grey colours. The appliance is supplied with various beaters. Main components: mains plug (JWM, 2,5 A, 250 V, + marks of approval); mains supply cord (CABLE TON N/12017, H03VVH2-F 2X0,875mm2, + marks of approval); motor (HD4515, 230 V, 50/60 Hz, Z.P Class: B), speed switch (BK-218). Technical parameters: 230 V; 50 Hz; 250 W; Class II. [2]
Reported risk explanation
The product poses a risk of electric shock because: - the cord is not fixed properly to the appliance, - the internal wiring comes into contact with moving and sharp parts, - there is non-compliance of plug dimensions, - there is no device to prevent food from getting into the appliance.The product does not comply with Low Voltage Directive and the relevant European standard EN 60335. [2]
Reported measures, verbatim
Type of economic operator to whom the measure(s) were ordered: OtherCategory of measure(s): Withdrawal from the market and recall from consumers ordered by the authorities.Date of entry into force: Unknown [2]
Report published 2007-06-29 · notifying country Hungary · reported origin Unknown
Reported product description
The product has white cover on the upper part and grey on the bottom. There is a grey insert at the handle. Technical specification: 220-240 V; 50-70 Hz; 180 W; Class II; Bar code: 9191441126006, lot identification: T-134-2 [3]
Reported risk explanation
The product poses a risk of electric shock because:- the internal wiring is not fixed;- it can get damaged due to sharp edges;- the construction of the plug is non-standardized.The product poses a risk of fire because of overheating of the motor during abnormal operation test. The product does not comply with Low Voltage Directive and the relevant European standard EN 60335. [3]
Reported measures, verbatim
Type of economic operator to whom the measure(s) were ordered: OtherCategory of measure(s): Withdrawal from the market and recall from consumers ordered by the authoritiesDate of entry into force: Unknown [3]
This product presents risk of fire and electric shock because internal wires contact sharp edges thus the insulation gets damaged, the mains plug is not of standard type, the appliance is constructed with the mains supply double-core cable of H03VVH2-F and the cross-sectional area of the stranded conductor is 0,5 mm2. This product does not comply with the LVD Directive and the European Standard. [4]
Reported measures, verbatim
Type of economic operator to whom the measure(s) were ordered: OtherCategory of measure(s): Withdrawal from the market and recall from consumers ordered by the authority.Date of entry into force: Unknown [4]
4 distinct official alert references, published between 2006-04-28 and 2009-08-28. Counts describe the acquired reports, with no market denominator.
Report year
Recorded alerts
2006
1
2007
1
2009
2
Recorded risk labels within this evidence task
Label combinations are source facts within one comparison; they do not create separate guides with identical preparation tasks.
Electric shock: 2 recorded references
Electric shock, Fire: 2 recorded references
Source selection, exclusions and calculation method
Filter the acquired, completely parsed English weekly XML releases. Deduplicate official alert references. Group by product category and the complete set of conditional evidence-question topics supported by actual risk text. Risk-label combinations remain recorded cohort facets and do not create buyer intents. Brand, product name, model, origin, notifying country, measurement-only changes and different wording of the same questions do not create intents. Unrecognized mechanisms stay internal for enrichment. Count report years and notifying countries deterministically. Display at most eight newest descriptions with at least 40 characters after whitespace normalization, nonempty reported measures and distinct casefolded descriptions; break date ties by official identifier. All cohort records count even if their description is shorter or not displayed. This is not a representative sample. Counts concern this acquired corpus only.
One acquired version per official public alert reference. Display at most eight newest distinct product descriptions whose normalized whitespace-collapsed text contains at least 40 characters and has nonempty reported measures; ties sort by official identifier. The complete cohort includes shorter descriptions. This is an explicit display selection, not a representative sample.
4 distinct descriptions displayed; 0 cohort records not displayed. Missing fields: {}.
These are selected, dated enforcement observations in the acquired weekly reports, not a random market sample, market-wide failure rate, proof of current product status, or a determination about your product. Notification country is not a complete sales-market or jurisdiction-coverage field. A quoted legal/standard reference is the report’s statement, not independently verified current law or a mandatory test panel.
Calculation safety-gate-evidence-comparison-10; units recorded alerts; no incidence denominator.
Turn the reported failure mechanism into a scoped investigation
Use this checklist to gather your business or product details before speaking with a specialist. The items below explain what to record and suggest useful supporting documents. You can add your own answers in the editable project brief.
Plug, socket and connector interfaces — what evidence do we have?
Identify the exact plug/socket or connector configuration, intended country interface and any adapter supplied. Document the interface dimensions, accessible parts and assembly controls for specialist review against current applicable requirements. Do not assume a reported interface failure applies to every configuration.
Accessible edges and points — what evidence do we have?
Compare the particular accessible edge or point, material, geometry and use conditions with the reported cutting mechanism. Ask a specialist to justify the applicable assessment and criteria for your actual product and users.
Useful evidence: Dimensioned edge/point drawings, material and finish specifications, use/accessibility context and relevant existing evaluation.
Can we trace the affected component, formula or design revision across our supplied products?
Compare the reported descriptions with your own identifiers and change records. Treat missing or “Unknown” source fields as unresolved; they do not establish that no action was needed.
Useful evidence: Product identifiers, revision history, supplier/batch traceability and market/operator records.
Who would own an evidence review and any resulting corrective-action decision?
Read the reported measures as historical observations. Establish your own operator roles, sector-specific rules, decision owner and communication responsibilities before adopting another case’s response.
Conditional: Product-risk evidence and operator-role review — Compare the recorded product features and failure mechanism with your product. Confirm the applicable product regime, deciding evidence, operator responsibilities and justified next steps. This does not assume that GPSR or a representative appointment applies to every alert category.
Questions for providers
Which specific product features and reported risk mechanism make these cases relevant or irrelevant to our product?
What current legal, standards or scientific sources support your proposed investigation criteria, and what cannot be concluded from these dated alerts?
Which existing evidence can answer the risk question, what additional work is justified, and who owns any resulting corrective-action decision?
Sources and data dates
Read the official document in context. The audit details identify the precise locators and preserved versions used for this page.
