The acquired cohort contains 29 official alert references published from 2021-02-19 to 2026-10-02. This page compares 8 selected, distinct product descriptions, including portable karaoke set, electronic game, portable mini fan. The other 21 records still contribute to the cohort counts but are not displayed: descriptions may repeat, lack the display inputs, or fall outside the eight-description display limit. The recorded risks raise separate evidence questions about cadmium, lead, plasticizers. Compare the product features and dated findings below before scoping an investigation. These historical observations do not determine your product’s compliance or a market failure rate.
Evidence retrieved 2026-10-07. Source versions and topic-specific limits are listed below.
Dated official observations
Compare the product features and reported failure mechanism
The source wording below describes the reported case at that time. Read each complete report before using it in an investigation.
Portable karaoke set · SR/02662/26
Report published 2026-10-02 · notifying country Sweden · reported origin People's Republic of China
Reported product description
Karaoke set with two wireless microphones and a USB cable. [1]
Reported risk explanation
The solders in the product have excessive concentrations of lead and cadmium (measured values up to 37,9% and 0.175% by weight, respectively). Lead poses a risk to the environment and cadmium bio-accumulates and poses a risk to the environment.The plastic material of the cable has excessive concentrations of bis(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP), lead and short chain chlorinated paraffins (SCCPs) (measured values: 2.47%, 3.25%, 0.25% and 2.24% by weight, respectively). These phthalates poses a risk to human health and the environment. SCCPs persist in the environment, are toxic to aquatic organisms at low concentrations and bio-accumulate in wildlife and humans, posing a risk to human health and the environment. The product does not comply with the requirements of the Commission Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) nor with the Persistent Organic Pollutants (POP) Regulation. [1]
Reported measures, verbatim
Type of economic operator taking notified measure(s): DistributorCategory of measure(s): Removal of this product listing by the online marketplaceDate of entry into force: 01/07/2026 [1]
Report published 2026-08-14 · notifying country Luxembourg · reported origin People's Republic of China
Reported product description
Electronic fidget toy and reaction game for children. [2]
Reported risk explanation
The solders in the product have an excessive concentration of cadmium and lead. (measured value: up to 0.42% and 0.23% by weight, respectively). Cadmium bio-accumulates and poses a risk to the environment.Lead poses a risk to the environment. Moreover, the plastic material of the product has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) and dibutyl phthalate (DBP) (measured values: 3.3 % and 5.1% by weight, respectively). These phthalates may pose a risk to human health and the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive). [2]
Reported measures, verbatim
Type of economic operator to whom the measure(s) were ordered: DistributorCategory of measure(s): Withdrawal of the product from the marketDate of entry into force: Unknown [2]
Report published 2026-08-14 · notifying country Luxembourg · reported origin People's Republic of China
Reported product description
Rechargeable handheld mini fan intended to provide personal cooling. It features a built-in rechargeable battery, three fan speed settings, a wrist strap, and USB charging capability for portable use. [3]
Reported risk explanation
The kink protection of the charging cable has an excessive concentration of cadmium, lead and bis(2-ethylhexyl) phthalate (DEHP) (measured values up to 0.0122%, 37% and 7.9% by weight, respectively). Lead and cadmium pose a risk to the environment. DEHP may pose a risk to human health and the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive). [3]
Reported measures, verbatim
Type of economic operator to whom the measure(s) were ordered: RetailerCategory of measure(s): Withdrawal of the product from the marketDate of entry into force: 30/04/2026 [3]
Report published 2026-05-29 · notifying country Ireland · reported origin People's Republic of China
Reported product description
White selfie ring for mobile phones with USB cable. Product sold online, in particular via www.did.ie. [4]
Reported risk explanation
The solders in the product have an excessive concentration of lead and cadmium (measured values up to 74% and 0.12% by weight, respectively). In addition, the cables have an excessive concentration of Bis(2-ethylhexyl) phthalate (DEHP) (measured value up to 6.4% by weight). Lead and cadmium pose a risk to the environment. DEHP may harm the health of children by causing possible damage to their reproductive system. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive) nor with the REACH Regulation. [4]
Reported measures, verbatim
Type of economic operator taking notified measure(s): RetailerCategory of measure(s): Withdrawal of the product from the marketDate of entry into force: 04/02/2026 [4]
Report published 2026-01-16 · notifying country Belgium · reported origin People's Republic of China
Reported product description
Hair brush dryer. Product sold online, in particular via bol.com. [5]
Reported risk explanation
The solders in the product have an excessive concentration of lead and cadmium (measured values up to 67% and 0.56% by weight, respectively). Additionally, the plastic material of the product has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP), diisobutyl phthalate (DIBP) and dibutyl phthalate (DBP) (measured values up to 16%, 1.5% and 0.14% by weight, respectively). Lead poses a risk to the environment, and cadmium bio-accumulates and poses a risk to the environment. Phthalates may harm the health by causing possible damage to the reproductive system and to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive). [5]
Reported measures, verbatim
Type of economic operator to whom the measure(s) were ordered: ImporterCategory of measure(s): Withdrawal of the product from the marketDate of entry into force: Unknown [5]
Report published 2025-12-26 · notifying country Sweden · reported origin People's Republic of China
Reported product description
Electrical dance mat game. Product sold online, in particular via Amazon (ASIN: B0DNQX13R7). [6]
Reported risk explanation
The solders in the product have an excessive concentration of lead and cadmium (measured value up to 75.1% and 0.3% by weight, respectively). The plastic material of the cable has excessive concentrations of bis(2-ethylhexyl) phthalate (DEHP), di-n-butyl phthalate (DBP) and short chain chlorinated paraffins (SCCPs) (measured value up to 1.36%, 0.43% and 4.98% by weight, respectively). DEHP and DBP pose a risk to human health and the environment. SCCPs persist in the environment, are toxic to aquatic organisms at low concentrations and bio-accumulate in wildlife and humans, posing a risk to human health and the environment. Prolonged exposure to them through the skin may cause cancer. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive) nor with the Persistent Organic Pollutants (POP) Regulation. [6]
Reported measures, verbatim
Type of economic operator taking notified measure(s): DistributorCategory of measure(s): Removal of this product listing by the online marketplaceDate of entry into force: 13/11/2025 [6]
Report published 2025-09-12 · notifying country Sweden · reported origin People's Republic of China
Reported product description
Lamp in the shape of the moon with a remote and an USB cable. Product sold online, in particular via www.prylpelle.se. [7]
Reported risk explanation
The plastic material of the cable has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP) and short-chain chlorinated paraffins (SCCPs) (measured values up to 3%, 2% and 1.7% by weight, respectively). The solders in the product's Printed Circuit Board (PCB) have excessive concentrations of lead (measured value up to 76.4% by weight), while the solder in the remote' PCB have an excessive concentration of cadmium (measured value: 0.37% by weight). DEHP and DBP pose a risk to human health and the environment. SCCPs persist in the environment, are toxic to aquatic organisms at low concentrations and bio-accumulate in wildlife and humans, posing a risk to human health and the environment. Lead poses a risk to the environment, and cadmium bio-accumulates and poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive) nor with the Persistent Organic Pollutants (POP) Regulation. [7]
Reported measures, verbatim
Type of economic operator taking notified measure(s): DistributorCategory of measure(s): Withdrawal of the product from the marketDate of entry into force: 04/08/2025 [7]
Report published 2025-09-12 · notifying country Sweden · reported origin People's Republic of China
Reported product description
Wireless mouse with a charging cable. Product sold online, in particular via DHGate. [8]
Reported risk explanation
The plastic material of the cable has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) (measured value up to 2% by weight). Moreover, the solders in the product have excessive concentrations of lead and cadmium (measured values up to 62.3% and 0.06% by weight, respectively). DEHP poses a risk to human health and the environment. Lead poses a risk to the environment, and cadmium bio-accumulates and poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive). [8]
Reported measures, verbatim
Type of economic operator taking notified measure(s): OtherCategory of measure(s): Removal of this product listing by the online marketplaceDate of entry into force: 22/05/2025 [8]
29 distinct official alert references, published between 2021-02-19 and 2026-10-02. Counts describe the acquired reports, with no market denominator.
Report year
Recorded alerts
2021
1
2022
2
2023
6
2024
8
2025
6
2026
6
Recorded risk labels within this evidence task
Label combinations are source facts within one comparison; they do not create separate guides with identical preparation tasks.
Chemical: 1 recorded references
Chemical, Environment: 27 recorded references
Environment: 1 recorded references
Source selection, exclusions and calculation method
Filter the acquired, completely parsed English weekly XML releases. Deduplicate official alert references. Group by product category and the complete set of conditional evidence-question topics supported by actual risk text. Risk-label combinations remain recorded cohort facets and do not create buyer intents. Brand, product name, model, origin, notifying country, measurement-only changes and different wording of the same questions do not create intents. Unrecognized mechanisms stay internal for enrichment. Count report years and notifying countries deterministically. Display at most eight newest descriptions with at least 40 characters after whitespace normalization, nonempty reported measures and distinct casefolded descriptions; break date ties by official identifier. All cohort records count even if their description is shorter or not displayed. This is not a representative sample. Counts concern this acquired corpus only.
One acquired version per official public alert reference. Display at most eight newest distinct product descriptions whose normalized whitespace-collapsed text contains at least 40 characters and has nonempty reported measures; ties sort by official identifier. The complete cohort includes shorter descriptions. This is an explicit display selection, not a representative sample.
8 distinct descriptions displayed; 21 cohort records not displayed. Missing fields: {}.
These are selected, dated enforcement observations in the acquired weekly reports, not a random market sample, market-wide failure rate, proof of current product status, or a determination about your product. Notification country is not a complete sales-market or jurisdiction-coverage field. A quoted legal/standard reference is the report’s statement, not independently verified current law or a mandatory test panel.
Calculation safety-gate-evidence-comparison-10; units recorded alerts; no incidence denominator.
Turn the reported failure mechanism into a scoped investigation
Use this checklist to gather your business or product details before speaking with a specialist. The items below explain what to record and suggest useful supporting documents. You can add your own answers in the editable project brief.
Cadmium-bearing component or material evidence — what evidence do we have?
If the corresponding material/component is used in your product, identify which part and finish are in scope and obtain composition/lot evidence. Keep the report’s measured amount as a dated reported observation; ask a specialist to verify identity, use/actor conditions and current legal criteria before any conclusion.
Useful evidence: Component/finish BOM, supplier composition/lot documentation, relevant analytical results with method and detection limits, and a current applicability review.
Lead-bearing material and exposure context — what evidence do we have?
Identify the particular material/component, its accessible/use context and supplier evidence. Reconcile any analytical result with the sampled part, method and lot. A reported concentration in another product does not establish your result or a universal limit.
Useful evidence: Part/material BOM, supplier specifications, sampling/method/results, lot/revision records and current use-specific legal review.
Plasticizer identity, material and use — what evidence do we have?
Identify the actual plasticizer/substance and polymer/component, with composition and use/exposure facts. Similar abbreviations or a general “phthalates” label do not resolve exact identity or applicable conditions. Keep concentrations and legal scope questions separate.
Useful evidence: Supplier substance/CAS/EC identities, composition and material records, sampled-component results and exact use/actor context.
Can we trace the affected component, formula or design revision across our supplied products?
Compare the reported descriptions with your own identifiers and change records. Treat missing or “Unknown” source fields as unresolved; they do not establish that no action was needed.
Useful evidence: Product identifiers, revision history, supplier/batch traceability and market/operator records.
Who would own an evidence review and any resulting corrective-action decision?
Read the reported measures as historical observations. Establish your own operator roles, sector-specific rules, decision owner and communication responsibilities before adopting another case’s response.
Conditional: Product-risk evidence and operator-role review — Compare the recorded product features and failure mechanism with your product. Confirm the applicable product regime, deciding evidence, operator responsibilities and justified next steps. This does not assume that GPSR or a representative appointment applies to every alert category.
Questions for providers
Which specific product features and reported risk mechanism make these cases relevant or irrelevant to our product?
What current legal, standards or scientific sources support your proposed investigation criteria, and what cannot be concluded from these dated alerts?
Which existing evidence can answer the risk question, what additional work is justified, and who owns any resulting corrective-action decision?
Sources and data dates
Read the official document in context. The audit details identify the precise locators and preserved versions used for this page.
