MET Laboratories, Inc.
MET Laboratories, Inc. is a leading provider of testing, inspection, and certification services for electrical products, specializing in wireless RF testing, product safety, and EMC compliance.
Established in 1959, MET Laboratories, Inc., now part of Eurofins Scientific, is a global service leader in product approvals and regulatory certification. They offer comprehensive testing and certification services for electrical products, with a strong focus on wireless RF testing, product safety, and electromagnetic compatibility (EMC). MET Laboratories is an OSHA-recognized NRTL, providing product safety certification accepted by major retailers and authorities. Their expertise extends to wireless device testing, including Over-The-Air (OTA) testing for various cellular and Wi-Fi technologies, ensuring devices meet industry standards like CTIA and 3GPP. MET Labs also provides robust EMC/EMI testing solutions to ensure products operate effectively without causing or experiencing electromagnetic interference, helping clients achieve faster market access globally. They are accredited by numerous international bodies, enabling certification for a wide range of markets.
About
**Who they are**
MET Laboratories, Inc., now part of the Eurofins Scientific network, has been a global service leader in product approvals and regulatory certification of electrical products since its establishment in 1959. Headquartered in Baltimore, MD, they are an OSHA-recognized NRTL with 60 years of product safety expertise.
**Expertise & scope**
* Product Safety Testing & Certification: Ensuring products meet government, regulatory, and industry safety standards for global market access.
* EMC/EMI Testing: Evaluating electronic devices for electromagnetic compatibility and susceptibility to meet stringent compliance challenges.
* Wireless & RF Testing: Guiding manufacturers through certification for wireless products like smartphones, routers, and IoT devices, covering standards for medical, transportation, and regulatory bodies.
* Environmental Simulation Testing: Simulating extreme environmental conditions to verify product performance and safety.
* On-Site Field Testing & Evaluation: Providing evaluations and field labeling services for equipment lacking adequate marking for electrical safety.
* Global Market Access: Offering comprehensive solutions for market entry into various global destinations under a single test plan.
**Reputation / proof points**
* Established in 1959.
* OSHA-recognized NRTL (Nationally Recognized Testing Laboratory) for over 30 years.
* Approved to certify products in over 200 UL standard categories.
* The MET Mark for product safety is accepted throughout the United States & Canada.
* Accredited by the FCC, Industry Canada (IC), A2LA, Australia's ACMA, Japan's VCCI, Vietnam's MIC.
* Serves as a notified body for the RED Directives and operates under the IECEE CB Scheme.
MET Laboratories, Inc., now part of the Eurofins Scientific network, has been a global service leader in product approvals and regulatory certification of electrical products since its establishment in 1959. Headquartered in Baltimore, MD, they are an OSHA-recognized NRTL with 60 years of product safety expertise.
**Expertise & scope**
* Product Safety Testing & Certification: Ensuring products meet government, regulatory, and industry safety standards for global market access.
* EMC/EMI Testing: Evaluating electronic devices for electromagnetic compatibility and susceptibility to meet stringent compliance challenges.
* Wireless & RF Testing: Guiding manufacturers through certification for wireless products like smartphones, routers, and IoT devices, covering standards for medical, transportation, and regulatory bodies.
* Environmental Simulation Testing: Simulating extreme environmental conditions to verify product performance and safety.
* On-Site Field Testing & Evaluation: Providing evaluations and field labeling services for equipment lacking adequate marking for electrical safety.
* Global Market Access: Offering comprehensive solutions for market entry into various global destinations under a single test plan.
**Reputation / proof points**
* Established in 1959.
* OSHA-recognized NRTL (Nationally Recognized Testing Laboratory) for over 30 years.
* Approved to certify products in over 200 UL standard categories.
* The MET Mark for product safety is accepted throughout the United States & Canada.
* Accredited by the FCC, Industry Canada (IC), A2LA, Australia's ACMA, Japan's VCCI, Vietnam's MIC.
* Serves as a notified body for the RED Directives and operates under the IECEE CB Scheme.
Additional information
MET Laboratories, Inc. provides a streamlined approach to product compliance, emphasizing efficiency and cost-effectiveness. They offer dedicated project coordinators and real-time online project tracking through their METrak Online system. For wireless and RF products, they provide a one-stop solution covering pre-compliance testing, product testing, documentation, certification, and liaison services with regulatory bodies, enabling full market access for the USA, Canada, EU, Japan, Korea, Taiwan, Australia, and other international markets. Their on-site field evaluation services are designed to address situations where equipment lacks adequate marking for electrical safety, offering a remedy for failed inspections and providing thorough evaluations when and where needed.
Key Highlights
-
Established in 1959, MET Laboratories, Inc. brings over 60 years of experience in product safety testing and certification.
Source
“MET Laboratories, Inc was established in 1959 and has become a global service leader for product approvals and regulatory certification of electrical products in Baltimore, MD.”
-
They are an OSHA-recognized NRTL (Nationally Recognized Testing Laboratory), a status held for over 30 years.
Source
“MET became the first OSHA-recognized NRTL (Nationally Recognized Testing Laboratory) in the United States.”
-
MET Laboratories, Inc. is accredited by the FCC, Industry Canada (IC), A2LA, and serves as a notified body for the EU RED Directive.
Source
“We're accredited by the FCC, Industry Canada (IC), A2LA, Australia's ACMA, Japan's VCCI, Vietnam's MIC, Taiwan's BSMI, and operate as a notified body for the RED Directives.”
-
They offer a comprehensive one-stop solution for wireless and RF product compliance, covering multiple international markets.
Source
“Our one-stop solution enables you to meet all of your compliance requirements for the USA, Canada, EU, Japan, Korea, Taiwan, Australia and other international markets from a single source.”
Certifications & Trust Signals
-
Founded in 1959, demonstrating long-standing industry presence.
Source
“MET Laboratories, Inc was established in 1959 and has become a global service leader for product approvals and regulatory certification of electrical products in Baltimore, MD.”
-
The MET Mark for product safety is recognized by federal and local authorities, the retail community, and consumers.
Source
“The Eurofins MET product safety certification mark on a product is recognized by federal and local authorities having jurisdiction, the retail community, project managers, and the consumer as a product meeting the mandated requirement of compliance to applicable national safety standards.”
-
They are an OSHA-recognized NRTL, required under federal law for products used in workplaces.
Source
“The NRTL mark is required under federal law for products used in workplaces in all 50 states.”
Buyer Snapshot
Best for
- Manufacturers seeking product safety and regulatory certification.
- Companies needing EMC/EMI, Wireless/RF, and Environmental testing.
- Businesses requiring global market access solutions.
How engagement typically works
- Dedicated project coordination.
- Online project tracking.
- Streamlined testing processes.
Typical deliverables
- Product safety certifications (e.g., MET Mark).
- EMC/EMI test reports.
- Wireless/RF compliance reports.
- Environmental simulation test results.
- Field evaluation reports and labeling.
- Global market access documentation.
Good to know
- Best when requiring testing and certification for North American and international markets.
- Ideal for products needing to meet FCC, RED, ISED, and other global standards.
Pricing
Model:
Custom pricing
HQ:
Baltimore, US
Languages:
English
Timezones:
EST
Status:
listed
Services & Capabilities
Wireless / RF Testing (FCC / RED / ISED)
Industries:
Medical Devices
Pricing model:
Custom pricing
Programs Supported:
FCC, CE RED, ISED Canada
Is Accredited:
Yes
Accreditation Body:
A2LA
Red Notified Body Support:
Yes
Ised Support:
Yes
Sar Testing Capability:
No
Ota Testing Capability:
Yes
Supported Radios:
Wi-Fi, LTE/5G, GNSS
Module Certification Support:
Yes
End Product Certification Support:
Yes
Quote SLA:
< 24 hours
Rush Available:
Yes
Filing Support:
Yes
Regions Served:
United States, Canada, Europe, Worldwide
Sample Return Policy:
Return
Nda Support:
Yes
Minimum Project Size:
No minimum
Additional wireless_rf_testing Details
Programs Supported
FCC, CE RED, ISED Canada, UKCA, Other
Tcb Relationship
Yes
Sar Testing Capability
Yes
Supported Radios
Wi-Fi, Bluetooth, LTE/5G, NFC, Proprietary, Other
Lead Time Band
Start in 0-2 weeks
Quote SLA
< 24 hours
Sample Return Policy
Return, Dispose, Both options
Minimum Project Size
Custom
Pricing Model
Per project
